Analysis of Malware: Detecting Behavior & Anti-Reversing Techniques

Scenario:

One of our clients observed a suspicious behavior in a program and wanted us to analyze and identify if any malicious activities were being performed by the same. The program wasn’t detected by their anti-virus solution during ‘file access operations’. However, some unusual outbound network traffic triggered alerts from the network monitoring team.

Filename Size (in bytes) File Type Hash
pprtc.exe 71,168 PE (Win32) (MD5)dda3b490cd01690e12b280e5bb935bce
(SHA1)ca4175a0c526d1be74fd1b00668e0799e41f0e76

Table 1: Suspect File Details

Opening the file in Hex-editor, it was found that suspect file was ‘packed’ using UPX.UPX is a program often used by virus writers to bypass Anti-Virus protection by compression techniques. When the UPX program is used with any clean binaries, all original PE sections, i.e., text, data, rsrc etc., will get compressed. These compressed sections will be aligned under the name of UPX, UPX0 and UPX1, as you can see in Figure 1 below. UPX then adds an additional code with which it will decompress these sections before actual execution.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 1: UPX Packer Identified

Unpacking such packed binaries is quite straight forward. We can use the packing program (UPX.exe in this case) to unpack the EXE as shown below:

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 2: Unpacking the program

After unpacking, original/unpacked binary was found with hash value of fd818e8433a7804ba8a57cea50dcafff (MD5)

The initial phase of analysis was to identify the behavior of suspected file execution by setting up a sandbox with relevant tools.  This is called ‘Dynamic Malware Analysis’. I shall try to explain the tools and setup required for dynamic analysis in a future a blog post.

During dynamic analysis we are mainly looking at the run-time execution of suspect file:

  • Is it making any process calls?
  • Are there any system file (read/write) operations being performed?
  • Any registries being accessed?
  • Is it making any remote network connection?
  • If it is connecting to remote servers, is it transferring any information?

Analyzing Processes & I/O Operations

While inspecting the process calls, it was found that suspect program calls theWindows Service Host Process (svchost.exe), which is implemented where multiple services share one process for reducing load of system resources [1].

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 3: Process Calls to Service Host

The file I/O operations were also analyzed and found that suspect program was accessing following files;

%USERPROFILE%\Application Data\Mozilla\Firefox\Profiles\iruggagh.default\webappsstore.sqlite 
%USERPROFILE%\Local Settings\Temporary Internet Files

These files are the browser history data-stores for Firefox and Internet Explorer respectively.

The Infected system created Windows Management Instrumentation (WMI) log file [2] during the execution of suspect binary.

%WINDIR%\system32\WBEM\Logs\wbemprox.log 

This system file contains WMI proxy server information affecting to connectivity issues. As showen in the figure below, it was found that suspect program was trying to perform some privileged operations.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 4: wbemprox.log Entry

The suspect program was also performs certain registry operations. One of the interesting registry modifications noticed during analysis was an additional key value (i.e., null value) to registry entry of Windows command prompt HKCU\Software\Microsoft\Command Processer\AutoRun. This means the Windows command program will be non-functional as the AutoRun, i.e., startup parameter, was set to NULL.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 5: Command Processor Suspicious Entry

The suspect program also added a crypto seed into the registry. This means the program was possibly using anti-reversing techniques. We will see more details about this in static analysis.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 6: Crypto Seed Identified in Registry

Analyzing Network Operations

While analyzing the network communication during dynamic analysis, it was found that the suspect binary made HTTP requests to multiple domains. The network traffic was captured in a sandbox environment and you can download the raw PCAP file from here.

Calls to following domains were identified

  • obofonaxy.nl
  • aqaxiboqe.nl
  • ducyqaxas.nl
  • codudiref.nl
  • fojavexuz.nl
  • walaleqiw.nl
  • geqeguput.pl
  • zybycowed.pl
  • zejotires.pl
  • bocaxidej.pl

All the Netherland domains (.nl domains) were dead at the time of analysis. But all the Poland domains (.pl domains) resolved to the same IP address: 148.81.111.94

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 7: Analyzing Network Capture using FindDomainCalls[3]
This IP belongs to Naukowa i Akademicka Sieć Komputerowa (“Research and Academic Computer Network”) or NASK[4].

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 8: Geo Trace

With a brief understanding of what the binary was trying to do on a victim’s machine, we now proceed to conduct a static analysis. We first need to identify any anti-reversing techniques used by the program.

Loading up the malware in a debugger (IDA Free 5.0) we manually step-into each instruction and try to identify if the isDebuggerPresent function is being called. This function is used by the binary to identify if any debugger is attached to the process.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 9: Ant-debugging Techniques – IsDebuggerPresent

This anti-reversing protection can be easily bypassed. To do this, we setup a breakpoint with a user-defined condition – assign EAX to 0(so that each time when the function gets called, it should sets the value 0 in EAX).This needs to be done at all locations where a reference to the isDebuggerPresent function is made. As the condition always returns 0 and the malware binary then interprets this as debugger is not present.

The suspect binary was found to be using self-modifying routines which is a sophisticated technique used by malware authors to dynamically change the code during execution.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 10: Self Modified Signature Identified by the debugger

Self-modifying code makes a program appear different from it’s actual code. In this case, the suspect program was passing through a set of routines iteratively which changes the existing code during execution. In the screenshot below, we can see multiple calls to address spaces which are used by the self-modifying routines.

Analysis of Malware : Detecting behavior & Anti-reversing techniques
Figure 11: Random Iteration for Self Modified Code

Overall, we can conclude that the suspect program was crafted by sophisticated writers with multiple anti-reversing techniques such as packers, debugger-detection, cryptographic techniques and self-modifying routines.

However, a previous analysis report available at VirusTotal displayed a lot of similarities to our suspect binary.

https://www.virustotal.com/en/ip-address/199.217.115.62/information/

Although the IP address mentioned in this analysis was not found in our network capture, the domain names and URL calls were found to be the same.

The suspected binary was scanned using VirusTotal API and the result as follows

AV Name Detection Result
MicroWorld-eScan Gen:Variant.Kazy.213219
McAfee RDN/Generic.tfr!dn
K7AntiVirus Trojan
K7GW Trojan
TheHacker Posible_Worm32
Agnitum Trojan.Droma!RnznSPio82Q
Symantec WS.Reputation.1
Norman Moure.B
TrendMicro-HouseCall TROJ_GEN.F0C2C0KH513
Avast Win32:Malware-gen
Kaspersky Trojan.Win32.Droma.c
BitDefender Gen:Variant.Kazy.213219
NANO-Antivirus Trojan.Win32.Droma.caesga
Emsisoft Gen:Variant.Kazy.213219 (B)
Comodo UnclassifiedMalware
F-Secure Gen:Variant.Kazy.213219
DrWeb Trojan.KillProc.28071
VIPRE Trojan-Downloader.Win32.Moure.ba (v)
AntiVir TR/Kazy.213219
TrendMicro TROJ_GEN.F0C2C0KH513
McAfee-GW-Edition RDN/Generic.tfr!dn
Sophos Mal/Generic-S
Jiangmin Backdoor/Androm.biz
Antiy-AVL Trojan/Win32.Droma
AhnLab-V3 Trojan/Win32.LockScreen
GData Gen:Variant.Kazy.213219
Commtouch W32/Backdoor.IGGZ-7997
VBA32 BScope.Trojan.AET.8807
ESET-NOD32 Win32/TrojanDownloader.Moure.X
Ikarus Trojan.Win32.Droma
Fortinet W32/Krap.JI!tr
AVG BackDoor.Generic17.ALQS

References:

  1. Service Host : http://en.wikipedia.org/wiki/Svchost.exe
  2. WMI Service Log Files : http://msdn.microsoft.com/en-us/library/aa827355%28v=vs.85%29.aspx
  3. FindDomainCalls : https://github.com/c0d3r4ck/FindDomainCalls/
  4. Naukowa i Akademicka Sieć Komputerowa : http://en.wikipedia.org/wiki/Naukowa_i_Akademicka_Sie%C4%87_Komputerowa

Author


2 comments

Great article! Looking forward to your next one about your toolkit.
Thanks for writing.

-Alex

Every weekend i used to pay a quick visit this site, as i wish for enjoyment, since
this this web site conations genuinely good funny stuff too.

Leave a Reply

Your email address will not be published. Required fields are marked *

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.